Seats produced by Tai'an Fantawild

Fangte amusement equipment manufacturer, dome-screen flying cinema, water amusement equipment, roller coaster column production, and large amusement equipment manufacturing company Shandong Huanwei will guide you on the maintenance of amusement equipment.

1. For plastic parts and fiberglass, dilute and soak them in soap water, disinfectant laundry detergent, bleach, etc., scrub them with a soft cloth or soft brush, rinse them with clean water, and then dry them with a clean cloth or let them air dry. Finally, spray 84 disinfectant for disinfection.

Secondly, the soft sponge part can be scrubbed with a soft cloth dampened with soapy water, or placed in direct sunlight for disinfection.

III. For the moisture-resistant, heat-resistant, and non-fading wooden parts, they can be soaked in soap water, washed, dried in the sun, and then sprayed with 84 disinfectant for disinfection.

IV. If rust removal is required for metal parts, brush off the loose rust with a brush and wipe clean with a dry cloth. After exposure to sunlight, apply a colorless Sanhe brand spray paint at a distance of about 20 centimeters, sweeping and spraying simultaneously. After it dries, spray again for protection. Clean, dry, and disinfect after the paint is fully dry.

When cleaning the electrical circuit components, first ensure that the power is turned off. Do not pour water on them. Generally, use a damp cloth to wipe and clean, and connect the power supply again after they are completely dry.

VI. All amusement equipment, including outdoor slides and tube tunnels, should not have standing water after rain. If there is water, a hole with a diameter of 4 millimeters should be drilled at the lowest point for drainage.

7. For indoor activity rooms, floors, walls, etc., daily ultraviolet radiation disinfection should be conducted, and the indoor environment should be frequently ventilated. Disinfect with hydrogen peroxide spray once a week.

Of course, while disinfecting, it is also necessary to check whether the connecting parts are secure, whether the metal parts that move frequently need oiling, and whether the electrical circuits, appliances, and ordinary components are damaged.

Recommended products