Understand the maintenance steps of amusement equipment

water play equipment

Amusement parks are undoubtedly familiar to everyone and are a favorite place for many friends to visit. We all know that any equipment needs regular maintenance after long-term use in order to increase its service life, and the same goes for amusement equipment. Next, the editor of water amusement equipment will explain to you the specific maintenance items of amusement equipment:

Maintenance of amusement equipment:

Bolts and pin connections between important components

The measures to prevent loosening of bolts connecting important components are intact; The measures to prevent detachment of the pin connection are intact.

Important weld surface quality inspection

There are no open welds, cracks, or severe corrosion in important welds.

Main load-bearing structure

The main load-bearing structure should be safe and reliable as a whole, without defects that affect safety such as cracks, grooves, deformation, corrosion, wear, mechanical damage, etc.

【 Bearings 】

The temperature rise of the end cover of the rolling bearing is normal without any abnormal noise, and the temperature rise at the oil hole of the sliding bearing is normal without any abnormal wear.

Lubrication and leakage

All lubrication points are in normal condition, and lubricant should be added as required for lubrication. The formation of oil droplets is not allowed; There should be no oil leakage in areas without relative movement.

【 Reducer and Friction Clutch 】

The reducer and friction clutch should be stable and reliable.

Steering mechanism

The steering mechanism should be flexible and reliable, and there should be no jamming phenomenon.

The safe distance between the passenger part and obstacles

A safety distance of no less than 500mm should be left between the passenger area and obstacles.

[Places within reach of passengers]

No exposed sharp edges, corners, burrs, or dangerous protrusions are allowed where passengers may come into contact.

Handle, seat belt or safety bar

The handles, seat belts, or safety bars are securely fixed and undamaged; The safety bar should not have any empty travel that affects safety, with flexible movement and reliable locking.

Vehicle connectors and safety devices

The vehicle connector connection is reliable and the safety device is intact.

[Wheel]

Fixed and reliable, flexible rotation; No cracks; Wear and tear should not exceed the specified requirements.

Rubber Inflatable Tire

Rubber inflatable wheels should be used, and the inflation pressure should be moderate.

Fiberglass components

There are no defects such as cracks or damages on the surface; The inner surface that touches passengers should be clean and free of exposed glass cloth heads; The edges of the fiberglass parts are smooth and flat, without any layering; The connection between fiberglass components and load-bearing components is reliable.