Understand the safety standards for the use of amusement equipment

Fantawild amusement equipment manufacturer

Amusement equipment is a commonly used entertainment tool in our daily lives, which has gained people's love and recognition, and is suitable for all ages. Not only children can play, but adults can also relax their body and mind in their spare time. Have you learned about the safety standards of this device? Let the editor from Fantawild amusement equipment manufacturer give you a brief explanation first.

1. Safety insurance measures

The passenger part of amusement facilities operating in the air should have a solid and reliable overall structure, and important components should be equipped with safety measures.

The number of steel wire ropes or chains used for hanging passengers shall not be less than two. The connection with the seating area must consider maintaining balance when one is disconnected.

The doors of the enclosed cabin that are more than 1 meter above the ground must be equipped with two locking devices that cannot be opened by passengers inside or one locking device with safety. The barriers at the entrance and exit of non enclosed cabins should also have locking devices with safety.

When the power supply suddenly cuts off or the equipment malfunctions during the operation of the amusement facilities, endangering the safety of passengers, automatic or manual emergency stop devices must be installed.

After the amusement equipment malfunctions during operation, measures should be taken to guide passengers.

2. Passenger safety restraint device

When the amusement equipment is in operation, if passengers may be moved, collided or thrown out of the ride, a passenger restraint device must be installed. For high-risk amusement facilities, two independent restraint devices should be considered. Safety belts, safety bars, gear bars, etc. can be used.

Restraint device: It should be reliable, comfortable, and have appropriate flexibility for components that come into direct contact with passengers. The design of the restraint device should be able to prevent any part of the passenger from being pinched or crushed, and should be easy to adjust and operate.

Seat belt: It can be used alone on facilities with slight swaying or slow lifting speed, without flipping or being thrown out of danger. The use of seat belts should generally be equipped with auxiliary handles. For facilities with intense physical activity, seat belts can serve as auxiliary restraint devices.

Safety bars: When there is a risk of passengers being thrown out during the operation of amusement facilities, corresponding types of safety bars must be installed; The safety bar itself must have strength and locking force, so that tourists are not thrown out or dropped, and it should be in a locked state before the equipment stops running.