What are the safety requirements for this type of amusement facility

Fantawild amusement equipment manufacturer

We are all familiar with amusement parks, especially large ones like Fantawild. There are many large amusement equipment in the amusement park, including some roller coasters, pendulum clocks, and other exciting projects. But the safety requirements for these amusement equipment are very high. Now let the editor from Fantawild amusement equipment manufacturer introduce to you the safety requirements for these amusement equipment.

1. Safety insurance measures

The passenger part of amusement facilities operating in the air should have a solid and reliable overall structure, and important components should be equipped with safety measures.

The number of steel wire ropes or chains used for hanging passengers shall not be less than two. The connection with the seating area must consider maintaining balance when one is disconnected.

The doors of the enclosed cabin that are more than 1 meter above the ground must be equipped with two locking devices that cannot be opened by passengers inside or one locking device with safety. The barriers at the entrance and exit of non enclosed cabins should also have locking devices with safety.

2. Passenger safety restraint device

When the amusement equipment is in operation, if passengers may be moved, collided or thrown out of the ride, a passenger restraint device must be installed. For high-risk amusement facilities, it is necessary to consider installing two independent restraint devices when necessary. Safety belts, safety bars, gear bars, etc. can be used.

Restraint device: It should be reliable, comfortable, and have appropriate flexibility for components that come into direct contact with passengers. The design of the restraint device should be able to prevent any part of the passenger from being pinched or crushed, and should be easy to adjust and operate.

Seat belt: It can be used alone on facilities with slight swaying or slow lifting speed, without flipping or being thrown out of danger. The use of seat belts should generally be equipped with auxiliary handles. For facilities with intense physical activity, seat belts can serve as auxiliary restraint devices.

3. Safety requirements for safety fences and platforms

Safety fences should be set up separately for entrances and exits, and guide fences should be installed at the entrance. The platform should have anti-skid measures.

The opening direction of the safety fence door should be consistent with the direction of passenger travel (except in special circumstances). To prevent injury to personnel's hands when closing the door, the gap between the door frame and the pillar should be appropriate, or other protective measures should be taken.