What are the methods for water quality treatment in amusement equipment

water play equipment

In many large amusement parks, water amusement equipment is naturally indispensable, bringing a lot of joy to friends. So when using water amusement equipment, water quality management is crucial. Poor water quality management can have a significant impact on the amusement park, and it is important to ensure that the water quality meets the standards. So how to do a good job in water quality treatment? Today, the editor will talk to you about the water quality treatment methods for water amusement equipment, right?

1. Control bacterial and viral contamination

In order to control harmful bacterial and viral contamination, it is necessary to add disinfectants reasonably to the pool water. The more commonly used disinfectants are bromine and its compounds, chlorine and its compounds. In special circumstances, excess sodium hypochlorite or calcium hypochlorite can be added to the pool water at once. Generate a higher concentration of chlorine, inhibit algae growth, and reduce unpleasant chloroform odor. It can also destroy organic pollutants that gather together.

2. Prevent algae growth and reproduction

Algae are extremely small plants with hundreds of different types. Algae can rapidly reproduce in water. Firstly, it will consume carbon dioxide dissolved in water, leading to a rapid increase in pH. As the dead algae consume the oxygen in the water, the clear pool water becomes a stagnant pool within a day.

3. Adjust the hardness of the water well

Hard water refers to water with a calcium ion concentration exceeding 250mg/L and an alkalinity higher than 150mg/L. The pH in hard water is relatively stable, but increasing the hardness of the water should not be used to stabilize pH. For hard water sources, a water softener should be installed at the replenishment port for pre-treatment. The concentration of calcium carbonate in soft water is less than 50mg/L or the concentration of calcium chloride is less than 30mg/L.

4. Maintain the transparency and cleanliness of the pool water

The total soluble solids (TDS) can be used as an indicator for the reaction. TDS refers to charged chemical substances that accumulate in pool water, especially when the pool water evaporates or when sufficient fresh supplementary water is not added. This substance is difficult to see with the naked eye, but due to its conductivity, it can corrode various components of the swimming pool, such as pumps, pipes, filters, etc.

5. Stabilize the pH of the pool water

The pH reflects the concentration of H+or OH - in the pool water, and the pH range specified by relevant regulations is 6, 5 to 8, and 5. In order to protect the reasonable operation of the swimming pool. Pool users should closely monitor whether this indicator meets the standard, as a simple test strip can be used to measure the pH of the water.