Knowledge of equipment maintenance is essential

Roller coaster pillar

With the continuous progress of our society, there are more and more amusement parks now. When we go to amusement parks again, we usually choose exciting roller coasters to experience the feeling of flying. But when we go up to experience that thrilling feeling, we always think about whether it's safe or not. The roller coaster pillars have undergone specific inspections. Next, let the editor in charge of making roller coaster pillars introduce you to the maintenance knowledge of roller coasters.

1、 Card management timeout fault

(1) The number of cards to be shuffled in the market is insufficient.

(2) Or the gear does not correspond to the number of cards.

(3) There is always a tile in the large plate that cannot be washed, causing the machine to alarm. The main reasons are: ① There is a problem with the mahjong tiles, ② There is a problem with the magnetic properties of the tile suction wheel,

2、 Head malfunction

(1) The machine head keeps pushing: the main reasons are: ① the magnets inside the machine head and the main light control and motherboard of the three groups of light controls are broken, ② the signal line is broken and the plug spring is loose, with poor contact, ③ whether the magnets of the machine head slider and signal wheel are weak or detached.

(2) Head pushing single sheet: ① Check if the magnetic control Hall element of the head is damaged, ② Check the height of the card light control or if there are any debris at the light eye, ③ If the motor is weak, ④ If the motherboard is damaged.

4、 Aluminum strip upper and lower door opening malfunction

(1) Aluminum strip continuous lifting alarm: ① Check if the two magnets on the aluminum strip have fallen off, ② Check if the wires are properly plugged in or damaged, ③ Check if the positioning magnetic control of the aluminum strip is damaged, ④ Check if the motherboard is damaged.

(2) Unable to upgrade or single step test without a license plate, but unable to upgrade with a license plate: ① The license plate pulling motor or capacitor is damaged, ② The license plate upgrading motor or capacitor is damaged, ③ Check the transformer, ④ Main board.

(3) When the aluminum strip is lifted and uneven with the panel, the main checks are: ① whether the aluminum strip rocker arm is vertical, ② whether the positioning magnetic control is tightened, ③ whether the panel is deformed or hollow, ④ whether a U-shaped gasket can be added under the aluminum strip bracket, ⑤ whether the aluminum strip bracket is damaged.